SIG SAUER SIG50 - Manual (Page 56)

56 www.sigsauer.com
malfunction cause correction
feed
no round fed into the chamber Magazine not properly inserted
or magazine is deformed or dirty insert magazine properly or change magazine
defective magazine replace magazine
Bolt does not close easily or
completely rifle or cartridge is fouled (dirty)
or rifle is too heavily lubricated clean and lubricate rifle and/or replace the
ammunition
incorrect ammunition replace ammunition
extraction/ejection
cartridge fails to extract from
chamber insufficient extractor tension due
to fouling clean bolt and extractor
dirty chamber clean chamber and bore
Broken/damaged ejector return to Sig Sauer
cartridge fails to eject from
action ejector requires lubrication lubricate ejector
troubleshooting guide