SkyHunter406 4000-10 AP - Manual (Page 2)

2
INDEX
PAGE
SECTION 1
DESCRIPTION
1-1 POINTER SENTRY ELT is a self-contained emergency locator transmitter capable of manual or automatic
operation.
1-2 POINTER SENTRY ELT is designed to withstand forced landing and crash environmental conditions and survive
in an operable condition. The highest quality materials and components have been selected for manufacturing to
insure rugged, reliable emergency equipment.
1-3 Automatic activation is accomplished by a deceleration sensing inertia switch. The inertia switch is designed to
activate when the unit senses longitudinal inertia forces as required in TSO-C91A.
NOTE: When properly installed, parallel to the line of flight, POINTER SENTRY ELT will not activate due to
turbulence, normal operations, or aerobatics.
1-4 POINTER SENTRY ELT (see Figures 1 and 2) consists of:
A A high-impact, fire retardant, waterproof case with carrying handle.
B A solid-state transmitter operating at the assigned emergency frequencies of 121.5 MHz and 243.0 MHz. Normal
transmission is modulated by a distinctive down swept tone.
C A battery pack P/N C2020 consisting of alkaline "C" cells in an impact resistant molded housing, with
interconnecting plug assembly. The battery pack is available from your local POINTER dealer or direct from the
distributor.
D An antenna connector outlet for fixed or telescopic antenna.
E A remote "ON-AUTO-RESET" control jack.
F A master "ON-OFF-AUTO" switch.
G An Inertia switch with electrical reset feature
H An external whip antenna, P/N3001 with coax cable, P/N 3002.
I Remote cabin switch kit P/N2019-10, and 2021-10 master switch guard and hardware.
J An Instrument Panel Warning Label to be affixed adjacent to Remote Switch. (Transport Canada requirement)
K A preformed anodized quick-detach mounting bracket, P/N 2017-10.
L An operation and installation manual.
M A warranty registration card.
N A Transport Canada required " E L T L OC ATE D HE R E ” Decal.
O Special high performance antenna P/N 3003 (OPTIONAL)
P A storable telescopic antenna, P/N 2006-10 with tether line.
REV 1 - JULY/97
SECTION 1
Description of Pointer Sentry ELT 2
SECTION 2
Pre-Installation Checkout 3
SECTION 3
Installation Instructions 4 thru 9
SECTION 4
Functional Testing 10 and 11
SECTION 5
Operating Instructions 12 and 13
SECTION 6
Battery Information 14
SECTION 7
Performance Requirements & Spec.’s 15