Sonics 1096 Actuator - Manual (Page 16)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
I N S T R U C T I O N M A N U A L • M O D E L S 1 0 9 9 / 1 0 9 6
15
POSITIVE STOP ADJUSTMENT
The positive stop is set to limit the downward travel of the horn to
approximately 75%. Readjustments may be required. Coarse adjustment of
the clearance between the face of the horn and part should be made using
the elevation control. Fine adjustment should be made using the positive stop.
The positive stop adjustment knob is located offset from the converter
housing. Turning the knob clockwise will decrease downward travel distance.
Turning the knob counterclockwise will increase the downward travel
distance. Rotate the knurled thumbscrew to lock and unlock the positive stop.
POSITIVE STOP
ADJUSTMENT
KNOB
CONVERTER
HOUSING
NOTE: For maximum
safety and productivity,
adjust the clearance
between the horn and the
part to a minimum that will
still allow ease of loading
and unloading.