Speeco 40100500 V2 - Manual (Page 11)

WARNING: KEEP AWAY FROM FLAMMABLE LIQUIDS AND GASES BEFORE STARTING MACHINE
1) Place the log splitter on a sturdy, level surface. Block the wheels to prevent movement of the log splitter during operation.
2) Make sure the handle is free of oil, grease and resins.
3) Oil the wedge and the top of the beam for smoother operation.
4) Ensure the equipment is in safe working condition.Operate the unit without loading to make sure it is working normally. Check all nuts, bolts
and hydraulic fittings are tight. Check the switch, power cable and plug for damage to avoid electric shock. Check that all safety shields
are in proper position.
5) Check that the outlet’s main voltage and frequency match the data stated on the model plate (or “Technical Specifications” in this manual).
6) Plug in the power cable and switch on the motor. NEVER use an extension cord longer than 25 feet. Minimum cord gage must be 16. The
power supply for this log splitter must have a protection device (circuit breaker) for over or under voltage.
7) Place a log on the beam against the ram. Make sure that the log is securely on the beam and up against the ram. Logs should be cut wth
square ends and to a maximum length of 20 in. in advance. Always use extra care when splitting logs with unsquare ends. See illustrration
below.
OPERATION
WARNING: ALWAYS WEAR SAFETY GLASSES, SAFETY GLOVES, SAFETY SHOES AND SUITABLE WORK CLOTHING WHEN
OPERATING THIS LOG SPLITTER. NEVER WEAR JEWELRY, NECKTIES OR OTHER LOOSE CLOTHING WHICH
COULD GET CAUGHT IN MOVONG PARTS.
DANGER: KEEP HANDS AND FEET CLEAR OF RAM AND WEDGE AT ALL TIMES.
Page 9
Control
handle