Speeco 40100500 V2 - Manual (Page 9)

NOTE: Ensure the power supply is not connected while preparing the log splitter for use.
STEP 1: Remove all the components from the crate. Inspect each piece for shipping damage. If any part is damaged, contact your dealer or
delivering carrier.
Page 7
OPERATING INSTRUCTIONS
NOTE: This machine is only intended for homeowners and non-commercial users to split firewood as detailed in the instructions and not for any other
purpose.
WARNING: Read and thoroughly understand all instructions and safety information before operating
this log splitter. Failure to do so may cause serious injury or death. Do not allow anyone to operate this
log splitter who has not read this manual. As with all power equipment, a log splitter can be dangerous
if assembled or used improperly. Do not operate this log splitter if you have doubts or questions
concerning safe operation. Call our customer service department at 1-800-525-8322 to address these
concerns.
Si no entiende ingles, se prefiere que busque alguien que interprete las instrucciones para usted.
ASSEMBLY INSTRUCTIONS
NOTE: This log splitter was completely assembled at the factory. Refer to the drawing and parts list should it become necessary to disassemble the
unit for repair or replacement of parts.
1. Hydraulic tank
2. Wedge
3. Ram
4. Log cradle
5. Electric motor
6. Connecting box
7. Switch
8. Power cable and plug
9. Wheel
10. Control handle
11. Front frame
12. Towing handle
13. Vent plug
14. Oil dipstick
1 Hex wrench x 1
2. Copper seal for dipstick x 1
Accessories
Model Plate
Preparation