Canon EOS 60D - Manual (Page 250)

250
1
Select [8].
2
Select the group.
Select a Custom Function group (I to
IV), then press <0>.
3
Select the Custom Function No.
Press the <U> key to select the
number of the Custom Function to be
set, then press <0>.
4
Change the setting as desired.
Select the desired setting (number),
then press <0>.
Repeat steps 2 to 4 if you want to set
other Custom Functions.
At the bottom of the screen, the
current Custom Function settings are
indicated below the respective
function numbers.
5
Exit the setting.
Press the <M> button.
X The screen in step 2 will reappear.
In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the
Custom Function settings.
3 Setting Custom FunctionsN
Custom Function No.
Clearing All Custom Functions
Even if all the Custom Functions are cleared, the setting for [8C.Fn IV -4:
Focusing Screen] will remain unchanged.