Checking the battery information, 3checking the battery information, Select [battery info – Canon EOS 60D User Manual

Page 268

background image


You can check the battery’s condition on the LCD monitor. Each Battery
Pack LP-E6 has a unique serial No., and you can register multiple
battery packs to the camera. When you use this feature, you can check
the registered battery pack’s remaining capacity and operation history.

Select [Battery info.].

Under the [7] tab, select [Battery
], then press <0>.


The battery info screen will appear.


Checking the Battery Information

Model of the battery or household power
source being used.

The battery check (p.29) displays the
remaining battery capacity in 1%

Shots taken with the current battery. The
number is reset when the battery is

Battery position

Battery’s recharge performance level is displayed in one of three levels.

(Green): Battery’s recharge performance is fine.
(Green): Battery’s recharge performance is slightly degraded.
(Red) : Purchasing a new battery is recommended.

Do not use any battery other than the Battery Pack LP-E6. Otherwise, the
camera’s full performance may not be attained or malfunction may result.

The battery information will be displayed even when the LP-E6 battery
pack is in the Battery Grip BG-E9.

When size-AA/LR6 batteries are used in the Battery Grip BG-E9, only
the battery check will be displayed.

If for some reason, communication with the battery is not successful, the
battery check display will show <

> on the LCD panel and in the

viewfinder. [Cannot communicate with battery] will be displayed. Just
select [OK] and you can continue shooting.