Cabletron Systems MicroMMAC 24T MICROMMAC- - Manual (Page 62)

LOCAL MANAGEMENT
4-8
(or other procedures where they are described) when working with LM
screens:
1. Use the Tab key or arrow keys to highlight the parameter(s).
2. Use the spacebar to toggle through settings for fields offering
selections; type settings over fields that you can edit or type over.
3. Highlight the SAVE command at the bottom of the screen after setting
parameters and then press the Return key.
The “SAVED” message appears on the screen indicating that your
change(s) have been saved to memory.
If you decide to exit the screen without saving your changes, the
“NOT SAVED-PRESS SAVE TO KEEP YOUR CHANGES” appears
on the screen.
Exiting a Local Management Screen
1. Use the Tab key or arrow keys to highlight the RETURN command
at the bottom of the screen.
2. Press the Return key.
Local Management returns you to the previous MENU screen.
Exiting Your Local Management Session
1. Use the Tab key or arrow keys to highlight the RETURN command
at the bottom of the screen.
2. Repeat Step 1., if necessary, until you arrive at the MAIN MENU
screen.
3. Use the Tab key or arrow keys to highlight the EXIT command at the
bottom of the MAIN MENU screen.
4. Press the Return key.
The Local Management screen disappears.
The remainder of this chapter describes Local Management screens and
how to use the tools they provide.