Cabletron Systems MicroMMAC 24T MICROMMAC- - Manual (Page 84)

LOCAL MANAGEMENT
4-30
VFNB screen configurations for Bypassed modules are described as
follows:
• Bypassed (|--B--|): The MicroMMAC-T is in the bypass mode and is
not connected to an STH module.
• Bypassed left (<--B--|): The MicroMMAC-T or the STH is in the
bypass mode, but it is connected to the next module.
• Bypassed right (|--B-->): The STH is in the bypass mode, but it is
connected to the module before it.
• Bypassed left/right (<--B-->): The STH is bypassed by the STH or
MicroMMAC-T before it and the STH after it.
Screen Mode Status
Use this field to select ADMINISTRATIVE, OPERATIONAL, or RING
OUT ENABLE screen status modes. It is located within parentheses at the
bottom of the screen.
ENABLE ALL PORTS (ADMINISTRATIVE mode only)
Use this field to enable all MicroMMAC-T and connected STH hub ports.
NEXT
Use this field to scroll to the next screen.
PREVIOUS
Use this field to scroll to the previous screen. This field appears only after
the NEXT command has been invoked.
REFRESH 3SEC
This field displays the time interval between screen counter updates. You
can choose refresh intervals of 3 to 10 seconds.
RETURN
Use this field to return to the STATUS MENU screen.
Selecting OPERATIONAL, ADMINISTRATIVE, or RING OUT
ENABLE Mode Screens
1. Highlight the screen mode status field.