Cabletron Systems MicroMMAC 24T MICROMMAC- - Manual (Page 71)

LOCAL MANAGEMENT
4-17
Figure 4-7. SNMP TRAPS Screen
The following sections discuss the fields on the SNMP TRAPS Screen and
provide instructions for using them.
Trap Destination
This field shows the IP Address of the workstation that receives traps from
the MicroMMAC-T.
Trap Community Name
This field displays the user-defined name of the SNMP Compliant
Network Management Stations that receive traps.
Enable Traps
This field lets you enable the transmission of SNMP trap messages.
Setting SNMP Traps
1. Highlight the Trap Destination field.
2. Enter the IP address of the station you want to receive traps from the
MicroMMAC-T. The format for this entry is XXX.XXX.XXX.XXX,
with the value of XXX ranging from 0 to 255.
uMMAC-T Local Management Flash Image Version: 01.00.01
SNMP TRAPS
Trap Destination Trap Community Name Enable Traps
xxx.xxx.xxx.xxx public [YES]
xxx.xxx.xxx.xxx public [YES]
xxx.xxx.xxx.xxx public [YES]
xxx.xxx.xxx.xxx public [YES]
xxx.xxx.xxx.xxx public [NO]
xxx.xxx.xxx.xxx public [NO]
xxx.xxx.xxx.xxx public [NO]
xxx.xxx.xxx.xxx public [NO]
SAVE RETURN