SunBriteTV SB-6560HD - Manual (Page 13)

SunBriteTV Model SB-6560HD Operator’s Manual Page 13
TV Installation – Rear Panel Connection Diagrams
CONNECTING TO A DVD PLAYER (Continued)
1. Make sure the power of the TV and your DVD player is
turned off.
2. Obtain an S-Video Cable. Connect the S-Video connector to
both your DVD player and Composite’s S-Video connector
port off the back of your MODEL 6560HD.
3. Obtain a RCA Audio Cable. Connect the white color
connector to both your DVD player and Composite’s white
connector port off the back of your MODEL 6560HD.
4. Connect the red color connector to both your DVD player
and Composite’s red connector port off the back of your TV.
5. Turn on the TV and your DVD player.
6. Use the remote control’s source button or the source button
on the right side of the TV to switch to AV1 (S-Video).
1. Make sure the power of the TV and your DVD player is
turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video
connector to both your DVD player and Composite’s Yellow
Video connector port off the back of your TV.
3. Obtain a RCA Audio Cable. Connect the white color
connector to both your DVD player and Composite’s white
connector port off the back of your TV.
4. Connect the red color connector to both your DVD player
and Composite’s red connector port off the back of your TV.
5. Turn on the TV and your DVD player.
6. Use the remote control’s source button or the source
button on the right side of the TV to switch to AV1 (CVBS).
Connecting with S-Video (fair) Connecting with
Composite (Fair)
Please note:
1. If AV 1 is already occupied, use AV2, as your connection port, and switch source to AV 2 (S-Video)
2. Reference the DVD player’s manual to make sure the DVD player is configured to output correctly to the TV.
3. This TV will turn off automatically if there’s no signal present for more than 15 minutes.