Clevo M860TU - Manual (Page 39)

Disassembly
Removing the VGA Card 2 - 13
2.Disassembly
Removing the VGA Card
1. Turn off the computer, turn it over, and remove the battery ( page 2 - 5 ), the component bay cover ( page 2 - 6 ) and
the CPU heat sink ( page 2 - 10 ).
2. The VGA Card(s) will be visible at point on the mainboard.
3. Remove screws - ( Figure 9b ) .
4. Carefully grip the plastic holder and lift the video card up and off the sockets.
5. Reverse the process to install the new VGA Card.
Figure 9
VGA Card Removal
a. Locate the VGA.
b. Remove the screws.
c. Lift the VGA card up and
off the sockets.

4. VGA Card
• 2 Screws
1
2 3
4
a.
1
2 3
4
4
c.
b.