Clevo M860TU - Manual (Page 40)

Disassembly
2 - 14 Removing the 3G Module
2.Disassembly
Removing the 3G Module
1. Turn off the computer, turn it over, and remove the battery ( page 2 - 5 ) and the component bay cover ( page 2 - 6 ).
2. The 3G module will be visible at point on the mainboard.
3. Carefully disconnect the cable , and then remove the screw .
4. The 3G module ( Figure 11c ) will pop-up, and you can remove it off the computer.
Figure 10
3G Module Removal
a. Locate the 3G module.
b. Disconnect the cable
and remove the screw.
c. The 3G module will pop
up.
d. Remove the 3G module.
Note: Make sure you
reconnect the antenna
cable to socket (
Fig-
ure 10b ).
1
2 3
4
b.
c. a.
3
1
2
4
4
c.

4.3G Module
• 1 Screw