Sure Heat AGA Vented Dual AGA - Manual (Page 15)

PILOT FLAME ADJUSTMENT
The Pilot Thermocouple should be engulfed by the Pilot Flame by approximately 1/2”. (See Figure 18.)
Should Pilot Flame become inadequate to heat the thermocouple properly, you will need to adjust the pilot
(See Figure 19.) Adjust the height of the Pilot Burner Flame by rotating the Pilot Adjust Screw to the desired
1/2” flame height.
Remember: Be sure to turn the pilot adjust screw (2) full turns in a counter-clockwise direction to
enable pilot operation.
Page 15