Sure Heat Sonoma SGR27 Natural Gas Conversion Kit - Manual (Page 8)

6. Install the NG valve assembly to the under side
of the side burner with the two (2) screws
previously removed. (See Fig. 33).
Note: Make sure the NG valve is facing towards
the front of the side burner and the valve
stem is inserted into the hole.
7. Reattach the bezel to the front of the side burner
and the NG valve with the two (2) screws
previously removed. (See Fig. 34).
Note: Make sure the bezel is installed in the
correct position. The “H” will be facing the
igniter.
8. Reattach the control knob.
9. Carefully run the supplied hose from the inside of
the cart through the grommeted hole in the cart
to the side burner assembly.
10. Connect the end of the new gas supply hose to
the NG valve assembly. (See Fig. 35).
This completes the side burner conversion.
Note: At the completion of the conversion, a leak
test should be performed on all fittings.
See Use and Care manual for leak testing
procedure.
Installation is now complete.
Enjoy your grill safely.
8
SGR27 Natural Gas Conversion Instructions
51053001
2/16/06
Fig 33
Screw
Fig 34
Screws
Bezel
Fig 35
Underside of side
burner shelf
“H”