SUUNTO t3 - Manual (Page 17)

2.3.5. General settings
In the General menu, you can set the button tones on or off and choose the units and format the
information is displayed in. Accept the settings with a short press of the MODE button.
Light
The light can be activated in any mode at any point by short pressing the - button. If you want to
use the light in Settings, Logbook or Totals, the light must be activated before entering them.
NOTE The light will not work when pairing the Suunto t3 to a POD, or when the
heart rate belt is connecting to the heart rate monitor.
Alarm snooze
Only the BACK button deactivates the alarm; pressing any other button activates the snooze
function, which lasts for 5 minutes. The snooze function can be activated 12 times, after which the
alarm will be deactivated until the set time the following day.
Pressing the BACK
button switches off
the alarm.
2.4. Training mode
To switch to the Training mode, short press the MODE button.
15