Heart rate signal troubleshooting – SUUNTO t3 User Manual
Page 31
After switching to Training mode,
Suunto t3 displays "HR" while it is seeking
the HR belt signal.
Instead of your heart rate, "HR" is
shown in the center of the display if no
heart rate belt is found.
Once the device has found the signals, your heart rate or speed and distance information will be
displayed in the center of the screen.
NOTE
For detailed instructions on how to pair and calibrate your optional speed
and distance POD, please refer to the POD's own user's guide.
3.2. Heart rate signal troubleshooting
If you can't see a heart rate signal, make sure you've paired the heart rate transmitter belt, see
Section 2.4.5. Pair a POD settings.
If you lose the signal, try the following steps to fix the problem.
•
Exit and then re-enter Training mode.
•
Make sure that you are wearing the heart rate transmitter belt correctly. (See Section 3.1.
Putting on the heart rate transmitter belt)
•
Ensure that the electrode area on the back of the belt is slightly wet.
29