SUUNTO t4 - Manual (Page 22)

The stopwatch is accessed by pressing the START button in Training mode and can be seen in
the top row. The information from the training that you time with the stopwatch, such as heart rate
and calorie consumption, is stored and can later be seen in Totals and Logbook. Therefore, you
should activate the stopwatch, and ensure you have a heart rate reading, whenever you
start a training session.
Pressing the
START button
starts the
stopwatch.
Pressing the
START button
again, stops
the stopwatch.
While the stopwatch is running, you can take up to 99 lap times, the first 50 of which are stored
in the memory, by pressing the + button.
NOTE It is not possible to reset the stopwatch while it is running. You must stop
it before resetting it.
NOTE If the stopwatch is running, and you switch back to the Time mode, the
stopwatch will be displayed on the top of the screen. To stop the stopwatch
go back to the Training mode.
To toggle between the Heart Rate view (HR shown in the middle of the screen, before connecting
to the heart rate belt) and the Training Effect view (TE shown in the middle of the screen before
starting the stopwatch), long press the BACK button.
20