SUUNTO Zoop - Manual (Page 84)

82
16. The dive computer should now active it’s timekeeping mode and show time
18:00 [6:00 PM] and date SA 01,01. Activate the instrument. Check that:
• All display segments work.
• The low battery warning is off.
• The buzzer beeps and backlight works.
• All the settings are correct. Reset if necessary.
17. Install the dive computer back into the console or boot and reassemble the
strap. The instrument is now ready for use.
Wrist model:
• Assembling into the boot: First insert the longer strap in its hole in the front of the
boot and then the dive computer into its cavity in the boot starting at the back
end. Then snap also the long strap end of the instrument into the boot. Stretch
the boot as needed.
• Assemble the shorter part of the strap. Use the spring bar tool or small screwdriv-
er to compress the spring bars. Make sure that the spring bars get fully seated so
they will not come off their holes.
Console model:
• Refit the dive computer in the console according the instructions of the console.
CAUTION Check after the first dives for possible moisture under the transparent
battery compartment lid, indicating a leak.