TechniSat DigitRadio 210 - Manual (Page 12)

12
>Press Select (7).
>Select the desired DRC mode (off, low or high) - when pushing Tune up/down (6).
DRC High - High Compressin
DRC deep - low compression
DRC off - no compression
> Confirm by pressing Select (7).
Remove inactive channels
You can remove inactive / not available stations that appear in your channel list.
>To open the menu, press Menu (8).
>Push Tune up/down (6) until you have reached the point inactive stations.
>Now press Select (7).
>Select by pushing Tune up/down (6):
Yes, if you remove the transmitter •
No if you want to cancel. •
>Confirm your selection by pressing Select (7).
Display
>Open the menu by pressing the Menu (8).
>Push Tune up/down (6) until you have reached the point display.