TechniSat DigitRadio 210 - Manual (Page 9)

9
Initial use
When you use the device for the first time, as well as after calling the factory setting
and siwtching on again, the channel search for DAB radio stations starts automatically.
During scanning, the display shows the progress of information and the number of
radio stations found.
After completion of the station search, the first station is displayed in alphanumeric
order and played back automatically.
Note :
If no stations are found, no signal could be received. In this case change the location of
the device and / or the position of the wire antenna and run the scan channels again.
Volume adjustment
>Rotate to adjust volume +/- ( 13) the desired volume.
- clockwise ->louder
- counterclockwise -> lower
Select DAB-/UKW-Betrieb
>Push the button DAB/FM (5) to switch between DAB mode and FM mode. During
the change from one mode to the newly selected mode will appear below the big time.