TechniSat DigitRadio 210 - Manual (Page 16)

16
>Rotate Tune up/down (6) to choose the desired operating language (German, Eng-
lish, Italiano or Francais).
>Confirm by pressing Select (7).
Factory setting
>Open the menu by pressing the Menu (8).
>Push Tune up/down (6) until you have reached the point factory settings.
>Now press Select (7).
>Push Tune up/down (6) to run the reset to factory setting ( Yes ) or cancel (No).
>Confirm by pressing Select (7).
When running the factory setting, the device restarts and is in standby mode after
that.
Software version
>Open the menu by pressing the Menu (8).
>Push Tune up/down (6) until you have reached the point SW version.
>Now press Select (7).