TechniSat DigitRadio 210 - Manual (Page 8)

8
Properties of the device
The DAB + digital radio is a new digital format, through which you can hear crystal
clear sound in CD quality.
The radio receives on FM frequencies 87.5-108 MHz ( analog) 174.9 to 239.2 MHz and
DAB (digital).
You can save 10 station on favorite program places the DAB or FM mode.
The display has a light. This can be activated at different stages (see display illumina-
tion ).
Preparing the device for operation
Connect the device with the supplied AC adapter to the mains (230 V ~ / 50 Hz).
>To bring power to the device, the cable of the AC adapter needs first be connected
into the DC 6V (page 5 # 5 ) on the unit and then plug the power adapter into the
socket 230 V ~ / 50 Hz plug.
>After the initial installation of the network connection temporarily “ Welcome to
digital radio “ appears.
Please unplug the AC adapter from the outlet when not in use, prolonged absence or
thunderstorms.
Improve antenna reception
The number and quality of received stations depends on the reception conditions at
the installation site. With the wired antenna an excellent reception can be achieved.
This antenna must be aligned in full to get the best reception.
Usage of headphones
Using headphones may damage your hearing!
Do not listen to the radio at high volume through headphones. This can lead to per-
manent hearing damage. Before using headphones adjust the sound volume to the
minimum level if you (not supplied ) to connect a pair of headphones, the internal
speaker is muted.
>Use only headphones with 3.5mm stereo plug.
>Plug the headphones into the headphone jack of the device. The sound reproduction
is now done exclusively through the headphones.
>If you want to listen through the speakers again, unplug the headphones from the
headphone jack of the device.
Switching the device on/off
> You pushthe device pushon or off by pressing ON/OFF ( 10).