TechniSat DVB-T/IP IRD - Manual (Page 38)

38
EN
Output Status Description
Video
Audio
Input Status ASI Description
Total BitRate Input data rate, brutto.
Valid Bitrate Input data rate, netto
Packet Size Frame length in the transport stream,
Input Status Tuner Description
Total BitRate
Input data rate, brutto.
Valid BitRate Input data rate, netto.
C/N (dB)
C/N Indicated value; the signal/noise ratio d C/N is important for the
quality of the satellite transmission signal. It describes the relation
between performance of the (Carriers) and the annoyance (Noise). As
smaller this value, as worser the quality of the received signal.
Eb/No(dB)
Eb/No Indicated value (Energy per Bit relating to signal/noise ratio
frequency.)
With decreasing Eb/No, the Bit failure rate increases.
Strength
Input level
DVB-S, DVB-S2 in dBm
DVB-C, DVB-T in dBµV
Packet Size Frame length in the transport stream,
BER BER post Viterbi; Bit failure rate behind the Viterbi-correction.