TechniSat DVB-T/IP IRD - Manual (Page 6)

6
EN
2
General
2.1 Description
The TechniNet IP IRD cards receive a large number of channels of the DVB-S/S2, DVB-C or
DVB-T signal and transmit those as IPTV or TSoIP via Ethernet 100BaseT interfaces in your IP
based network. As network protocol UDP or RTP are used.
The equipment is fitted with a TWIN-CI interface which can, with the aid of up to two CAMs,
encrypt the channels directly through the card.
The integrated ASI-Input and ASI-output enables various applications for further transmission
of the signal. Alternatively a SDI-out is offered.
It is further possible to convert one of the existing services with the integrated MPEG-2 SD -
Decoder in a FBAS –AV signal. In addition the card has also the possibility to receive IPTV data
streams and process them accordingly.
Due to an integrated switch matrix various ways of operations are offered:
Picture: 3-1 block diagram
The TechniNet IP IRD cards are intended for use in the TEchniNet IP base unit. In this, 8
modules can be operated next to the redundant power supply.
The control of the device is either possible via a local cable connected programmer remote
control, via web interface or preferably with the TechniNet Management Software by Ethernet
via PC.