TechniSat DVB-T/IP IRD - Manual (Page 5)

5
EN
> The device may only be kept in rooms (away from radiated heat or heat sources), where,
even if the climatic conditions change, the permissible surrounding temperatures can be
assured.
> Do not subject the set to any spray or dripping water..
> Liquid-filled objects are not allowed to be placed on the set.
> Only mount it to vertical surfaces.
> Keep the ventilation slots clear (30 cm each from the top and bottom).
> Ensure good ventilation (do not fit in cupboards or niches).
> In the event of water condensation, wait until the set has dried out completely.
> If the sets are used in conjunction with BS 3 fans to maintain the permissible surrounding
temperature, it is essential that additional suitable measures are taken to ensure that in the
event the fan stops, the set is switched off (disconnection from the mains).
Please note:
> DIN VDE regulations 0701, Parts 1 and 200.
> EN 50 083 - Part 1, safety requirements.
> The set may only be opened by qualified professionals (dealership).
> Repairs may only be carried out by qualified professionals (dealership), or the faulty set may
be returned to TechniSat with a precise description of the fault(s).
For your safety:
> Observe the above rules and notes.
> Set up the SAT set in accordance with the safety requirements
> Observe the rules on grounding and potential equalisation
> Only replace the mains lead with an original mains lead
> Only replace fuses with fuses of the same type, value and the same melting characteristics.
> The mains fuse is in the fuse holder between the mains socket and the mains switch and is
accessible after removal of the mains lead.
It is essential that all safety notes are observed!
EMV security
The device has to be used with TechniNet IP base unit 0000/5970 only. The interfaces have to
be connected with appropriate shield cables only. The unused slots in the base unit have to be
covered with suitable front plate fittings.