TeeJet CenterLine v1.07 User Manual
Page 24
18
CenterLine
CenterLine Setup
CenterLine
Software Version 1.07
Alarm
The <ALARM> setting, when set to ON, notifies the operator when entering a previously applied
area. The text window displays <APPLIED> when the implement swath is in a previously applied
area of the field.
To adjust the Alarm setting, go to Guidance setup, scroll until <ALARM> is displayed in the text
window, and press enter. Using Up or Down, scroll between the <ON> and <OFF> settings until
the desired setting is displayed in the text window. Press Enter to save the setting and return to
the Guidance setup menu.
Setting
Description
OFF
No Status Detect implemented. Default setting.
ON
Status detect assumes a single swath centered on the vehi-
cle.
Table 3: Status Settings
Figure 18: Setting the Alarm
Setting
Description
Off
No applied area detection.
On
Applied area detection alarm.
Table 4: Status Detect Settings