TeeJet CenterLine v1.07 - Manual (Page 52)

46 CenterLine
CenterLine Real-Time Operation
CenterLine
Software Version 1.07
The lightbar now displays <MARK B>. The next step is to establish guideline point B. To do this,
press Enter as the vehicle passes over the desired B location. This establishes the reference
guideline. The lightbar starts displaying X-Track guidance information as well as any user selected
messages defined in Lightbar setup (See “Lightbar Setup” on page 21). If the vehicle is too far
from the previously applied area to determine guidance information, a “Hollow” path is displayed
(See Figure 43 on page 42).
When the reference guideline is established, the operator can begin driving Curve AB guidance.
The CenterLine software detects which guideline is closest to the centerline of the vehicle and pro-
vides guidance information with respect to that line. As the vehicle moves across the field (Figure
46) new guidelines, parallel to the reference guideline, are established based on the swath width
value entered in Guidance setup. When making a turn at the end of the field, the lightbar displays
the distance to the next swath (see Figure 48).
Figure 48: Distance to Next Curved Swath
CenterLine
30.0 FT
CenterLine
27.2 FT
CenterLine
14.7 FT