TeeJet FieldPilot Install John Deere 8x20 - Manual (Page 12)

10
www.teejet.com
FieldPilot ®
4. PrePare the rear scV stack
Remove the plugs or test ports from the LS, T, and P ports of the rear SCV stack. Insert (R) in the LS port and
then insert (S) with the threaded end up. Next install adapters (Q) in the LS, T, & P ports of the SCV stack.
NOTE: If adapters (Q) have a metal washer it must be removed first.
Figure 1-7: Prepare The Rear SCV Stack
R
Q
s
threaded end
insert R & s