TeeJet FieldPilot Install John Deere 8x20 - Manual (Page 17)

15
FieldPilot ®
98-05145 R1
10. install steering disengage switch (kit 91-07011)
The steering disengage kit (U) is used to automatically disengage FieldPilot when the steering wheel is turned.
Remove the cover for the steering column. Attach magnets to shaft/knuckle as shown. Attach the aluminum
bracket to an existing bolt and bend it so that the sensor is within 1/8” of the magnets. Route the cable and ensure
it will not get tangled with any moving parts. Reattach the cover for the steering column.
Figure 1-15: Install Steering Disengage Switch (Kit 91-07011)
Magnets