Fieldpilot, Installation, Gps fieldpilot valve and hydraulic connections – TeeJet FieldPilot Install Miller Condor User Manual
Page 10: Overview of the machine
8
www.teejet.com
FieldPilot
®
installation
If there are questions concerning the installation of the FieldPilot system on this vehicle, or due to the
changes in component specifications the parts supplied in the kit are not exactly as presented in this
document, please contact your dealer or TeeJet Customer service representative for clarification
before installation. TeeJet Technologies is not responsible for misuse or incorrect installation of the system.
NOTE: BE VERY CAREFUL TO ABSOLUTELY SECURE ALL CABLES AND HOSES SO THAT THEY DON’T
INTERFERE WITH THE MANY MOVING PARTS OF THE MACHINE!
overview of the Machine
• The FieldPilot valve will mount on the right side of the machine frame just under the front right corner of the
cab
• The hydraulic connections will be in the same general location.
• The Excess Flow oil from the priority valve will route through the FieldPilot valve
NOTE: All references to left and right are stated as if the user is seated in the driver’s seat.
Figure 1-3: Overview of the Machine
Gps
Fieldpilot Valve and
Hydraulic Connections