TeeJet FieldPilot Install Miller Condor - Manual (Page 16)

14
www.teejet.com
FieldPilot ®
8. install steering disengage switch (kit 91-07011)
The steering disengage kit (U) is used to automatically disengage FieldPilot when the steering wheel is turned.
Remove front cover of steering column to gain access to the steering shaft. Using kit (U) , attach magnets to the
steering shaft. Position the sensor in the bracket to provide a 1/8” clearance between the sensor and magnets.
Use extension cable (W) to connect the steering disengage sensor to the SCM harness.
Figure 1-12: Install Steering Disengage Switch (Kit 91-07011)