CREATIVE Sound Blaster Audigy 2 Platinum eX - Manual (Page 28)

Installing Hardware 2-3
Step 3: Install the
audio card 1. Align the audio card with the PCI slot and press the card
gently but firmly into the slot as shown in Figure 2-3.
2. Do not force the audio card into the slot. Make sure that the
gold traces of the card’s PCI connector are aligned with the
PCI bus connector on the motherboard before you insert the
card into the PCI expansion slot. If it does not fit properly,
gently remove it and try again.
3. Secure the audio card to the computer.
Step 4: Install the
joystick connector 1. Align the joystick connector bracket next to
the audio card.
2. Secure the Joystick bracket with a screw (if necessary).
See Figure 2-4.
PCI
slot
Figure 2-3:Aligning the card against the slot.
Figure 2-4: Installing the joystick port