CREATIVE Sound Blaster Audigy 2 Platinum eX - Manual (Page 62)

Troubleshooting and FAQs B-2
Individual analog recording sources are not displayed in Creative Surround Mixer.
The following analog recording sources are combined in one recording control called Analog Mix (Line/
CD/Aux/PC), which is found in the Record panel of the Basic tab:
❑ Line-In
❑ CD Audio
❑ Auxiliary
❑ PC Speaker
Individual analog recording sources cannot be selected in Creative Surround Mixer.
Five analog recording sources are combined under the selection Analog Mix (Line/CD/Aux/PC). For
more information, see “Individual analog recording sources are not displayed in Creative Surround
Mixer.” on page B-2.
To record an individual analog source:
❑ In the Record panel of the Basic tab in Creative Surround Mixer, make sure the recording source
selected is Analog Mix (Line/CD/Aux/PC).
❑ In the Source panel, mute the analog sources that you do not want to record — by clicking the Speaker
button to change it to a button with a red cross sign on it.
No sound from the speakers.
Check the following:
❑ You have connected your speakers to your audio card's output.
❑ You have selected the correct source in the Source panel of Creative Surround Mixer.
❑ If both the above conditions have been met and you still do not get any sound, click the red plus sign
above the Volume control and check whether the Digital Output Only check box is selected. If it is,
you are in the Digital Output Only mode and so must connect to digital speakers to hear the sound from
your audio card. See the section on “Speaker Selection Settings” in Creative Speaker Setting’s online
Help for more information.