Vermont Casting IRHEDV32 - Manual (Page 26)

10003929 26
1. Install the unit according to Homeowner’s Manual.
2. Install the trim according to Installation Instructions.
3. Remove the two (2) screws at the bottom of the trim.
4. Install the riser at the bottom of the trim (Fig. 58).
5. Fasten the trim with the same two (2) screws removed
on step 3.
Note: The riser kit should only be used with the RHEBSL
& RHEBXL trim.
RHER1-Riser 1”
RHER2-Riser 2”
RHER5-Riser 5”
Riser Trim Dimensions
42.0” (1067mm) 1.0” (25.6mm) 2.55” (64.8mm)
42.0” (1067mm) 2.0” (50.9mm) 2.58” (65.6mm)
42.0” (1067mm) 5.0” (127.9mm) 2.58” (65.6mm)
A5) CAST TRIM OPTIONS
Cast Surround And Flat Face
HECBL Cast Surround Black
HECBLUE Cast Surround Blue
HECCG Cast Surround Charcoal Grey
HECGR Cast Surround Green
CSSP Polished Brass Small Trim for Cast Surround
CSLP Polished Brass Large Trim for Cast Surround (to be used with CSSP)
A6) FREESTANDING KITS
Convert Insert Into a Freestanding Stove
Note: 1) Requires Bay Window Face Kit
2) Vent starter kit FSHEDVSK must be installed to use any of the
freestanding shells.
FSNVCSKB Classic Black Freestanding Cast Shell
FSNVCSKM Midnight Black Enamel Freestanding Cast Shell
FSNVCSKG Green Enamel Freestanding Cast Shell
A7) RISER KITS
Length - A Height - B Depth - C
Fig. 41
A8) ARCH DOOR KITS
HEADKA - Antique Brass Arch Door
HEADKP - Polished Brass Arch Door
B) REMOTE CONTROL
MRC1 - On/Off Button Remote Control
MRC2 - Temperature Control Remote
MRC3 - Temperature Control with digital display
and 24 hour programmable clock.
Only for units with RN/RP valve. IMT - Wall mounted thermostat control,