Toa SX-2000 Series Installation - Manual (Page 159)

159
[Error Indications on the Menu Screen]
When the default display screen is displayed, pressing the menu key and then the oK key switches the
display to the error indication screen. Errors are displayed as follows. (for details, see the separate operating
Instructions, "SX-2000Ao Audio output unit" or "SX-2100Ao Audio output unit.")
FAULT
COMPONENT ERROR
FAULT
FAULT DETECTED
FAULT
COM
SX LINK COM FAULT
Failure Indication Description
System equipment or module
configuration differs from that
set by the SX-2000 Setting
Software.
System has failed.
Communications cannot be
established between the
SX-2000AO or SX-2100AO
and SX-2000SM.
"COMPONENT ERROR"
indication displayed in the
text display area.
"FAULT" indication flashes.
"FAULT DETECTED"
indication displayed in the
text display area.
"FAULT" indication flashes.
"SX LINK COM FAULT"
indication displayed in the
text display area.
"COM" indication flashes.
"FAULT" indication flashes.
10.4. SX-2000CI
SX-2000CI
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
POWER
CPU OFF
FAULT
CONTROL INPUT UNIT SX-2000CI
17
25
18
26
19
27
20
28
21
29
22
30
23
31
24
32
CONTROL INPUT
FAULT Indicator
FAULT Indicator lights yellow.
Failure Indication Description
FAULT Indicator flashes yellow.
Communications to the SX-2000AO or SX-2100AO are interrupted
for 5 seconds or more.
A failure is detected in the system.
Failure Indication Description
AO-xx MAINTENANCE
CF card not inserted into the
SX-2000SM.
"AO-xx MAINTENANCE"
indication displayed in the
text display area.
AI-xx UNLINKED AO-xx ALL CH OFF "AO-xx ALL CH OFF "
indication displayed in the text
display area.
The sound volume on all output
channels adjusted by the
front-mounted output volume
controls is muted.