Toa S-20S Ver.5.0 - Manual (Page 25)

24 25
Step 3. Designate the names of the folder and file containing the audio data to be written, then click the Open
button.
A confirmation dialog box is displayed.
Note
Two or more audio data with the same filename cannot be programmed. Change filenames before
programming.
Step 4. Click Yes.
The filename is displayed, and the audio data is written into the Sound Repeater.
Tip
Writing into an audio data area with a previously programmed data replaces the original data with new
one.
Step 2. Click the Write button.
A dialog box is displayed.