Toa S-20S Ver.5.0 - Manual (Page 6)

6
Step 5. Click the Next button according to the instructions on the screen until the installation is completed.
The Data Transfer Program "EV20man.exe" file has been installed in the designated folder (c:\
ProgramFiles\EV-20PCENG\ by default).
Step 6. Click the Close button.
The screen disappears, completing the software program installation.
A shortcut icon is created on the desk top.
Ensure that the "EV20man.exe" file has been correctly installed.
Then install the USB driver.
Step 7. Check to be sure that the Sound Repeater’s power is switched OFF.
Step 8. With the supplied USB cable, connect the Repeater’s USB terminal to the USB terminal of the PC or
USB hub.
Step 9. Switch on the Repeater’s power.
The following screen is displayed on the PC screen.