Usable audio data, Sample data, Audio data creation – Toa S-20S Ver.4.01 User Manual
Page 15
15
8. USABLE AUDIO DATA
The sample audio data contained in the supplied CD-ROM or previously prepared by the customer can be
read and written to the Sound Repeater.
8.1. Sample Data
For your convenience, the CD-ROM provides the sample audio data of chime tones and BGM. Use the
sample data in the [\English\Sample data] folder as required by writing them into the Sound Repeater. You
can preview these sample data on the PC.
8.2. Audio Data Creation
Previously prepared customer Wave (.WAV) files can also be used for broadcast. Specifications for Wave files
that can be written to the Sound Repeater are as follows:
Sampling frequency: 44.1 kHz
Quantifying number: 16 bits
Mode:
Monaural
Data format:
PCM
Filename:
8.3 format (up to 8 alphanumeric characters/underbar); extension: WAV)
Format: Wave
format
Note
The software program has a function to automatically recognize and remove
redundant data in the file header defined by the Broadcast Wave Format (BWF),
the upgraded Wave format. The function, however, may not work for all redundant
data. When creating Wave files, make setting not to add redundant data on your
Wave file edit program.