Toa S-20S Ver.4.01 - Manual (Page 25)

25
Step 1. Click the button corresponding to the audio data area to be written into.
Note
When the Sound Repeater is EV-20S, 4 audio data can be written into the audio data area indicated
as No.1 – 4 for this Repeater, however, the No.4 data will not be played back depending on the
amplifier the EV-20S is built in.
9.2. Writing Individual Audio Data to the Sound Repeater
Specific audio data can be written to or deleted from only the Sound Repeater Memory area if the PC backup
does not need. However, entry into the Comment column cannot be performed in the Sound Repeater
memory area.
Note
Starting the data transfer software program with the Sound Repeater connected to a PC causes the data
within the Repeater to be automatically read and displayed in the Sound Repeater Memory area. If not
displayed, click the Refresh button. The data within the Sound Repeater is read and displayed.
9.2.1. Writing individual audio data
2
1