Toa S-20S Ver.4.01 - Manual (Page 21)

21
Step 7. Click the OK button.
A dialog box is displayed.
Step 8. Designate the names of the folder and file containing the audio data to be programmed, then click the
Open button.
The confirmation dialog box is displayed.
Step 9. Click Yes.
The programmed audio file is displayed on the PC Hard Disk area.
Note
Two or more audio data with the same filename cannot be programmed. Change filenames before
programming.
Tip
Programming into an audio data area with a previously programmed data replaces the original data
with new one.