Toa 9000M2 Series Ver.200A - Manual (Page 13)

Page 13 of 33
5.3. Preset Memory Recall
Recalls any desired preset memories. 9000M2 Series Amplifier responds with the same
data as that received.
Note:
Settings to be stored in preset memories are referred to as “SCENE” in mixer mode and
“EVENT” in matrix mode.
Preset Memory Recall command cannot be received during power off.
F1H, 02H, 00H, <Preset Number>
<Preset Number> 00H - 1FH: Preset Number 1 - 32
Note: During single channel operation or BGM/PAGE operation in matrix mode
00H - 07H: Preset Number 1 - 8
Example 1: Recalling Preset Memory 1
F1H, 02H, 00H, 00H
Example 2: Recalling Preset Memory 2
F1H, 02H, 00H, 01H
Following command is used to terminate "EVENT" in Matrix Mode. (not available 9000M2
series)
F1H, 02H, 01H, (Event #)
9000M2 series Amplifier ignores this command .
The ROUTE event using the input channel with priority 8 (BGM event) and the BASE event
cannot be terminated by this command.
To terminate the BGM event or the BASE event, it is necessary to setup the BGM END
event to the unit and activate it.