Toa 9000M2 Series Ver.200A - Manual (Page 7)

Page 7 of 33
5.1.2. Channel Fader Gain(Paging Output Volume) - Position setting
Set the Paging output volume channel fader gains to a fixed value position.
Note: Command cannot be received during power off.
9000M2 Series Amplifier responds with the same data as that received.
96H, 03H, <Channel Attribute>, <Channel Number>, <Value>
<Channel Attribute>
01H: Output channel
<Channel Number>
00H - 07H (Paging Output channel 1 - 8)
<Value>
Position setting
00 – 7EH (-
∞ to +10 dB)
See CHANNEL FADER GAIN(Paging Output Volume) - POSITION V/S GAIN TABLE on
the next page.
Example: Setting the fader gain of channel 1 to 0 dB
96H, 03H, 01H, 00H, 6AH