Crown Boiler KSZ175 - Manual (Page 4)

2
table of contents
I. Product Description .............................................................. 2
II. Specifications ........................................................................ 2
III. Before Installing .................................................................... 3
IV. Locating the Boiler ............................................................... 4
V. Air for Combustion & Ventilation ......................................... 6
VI. Venting ................................................................................ 10
VII. System Piping Connections ................................................ 12
I Product Description
The KSZ series boiler is a cast iron oil-fired low pressure steam boiler designed for use in closed heating systems. This
boiler must be vented by natural draft into a lined masonry or metal chimney, or Type L vent. An adequate supply of air for
combustion, ventilation and dilution of flue gases must be available in the boiler room. This boiler has connections for use
with an indirect domestic water heater.
The KSZ series boilers are not designed for use in process or other “open” steam systems.
II Specifications
FIGurE 1: GEnEral cOnFIGuratIOn
VIII. Indirect Water Heater & Tankless Coil
Piping ........................................................... 14
IX. Fuel Line Piping ........................................... 17
X. Wiring ........................................................... 20
XI. Start-up and Checkout .................................. 24
XII. Service & Maintenance ................................ 27
XIII. Parts .............................................................. 32