Toa C-BC704W - Manual (Page 12)

Wall mounting bracket: Aluminum, Light gray, paint
Rear plate: Anodized aluminum
118 (W) x 185 (H) x 259 (D) mm (4.65" (W) x 7.28" (H) x 10.20" (D))
1.0 kg (2.2 lb)
Finish
Dimensions
Weight
Waterproof cap (accessory)
Hexagon socket screw
(accessory)
C-CC704's case
5. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
Ver. 1.00
URL: http://www.toa.jp/
8. Secure the C-CC704's case to the Wall Mounting Bracket with 4 hexagon socket screw, then cover these
screw holes with the waterproof caps as shown in the figure below.
9. Install the camera unit and dome cover to the case.
For the procedures, refer to p. 14 of the C-CC704's instruction manual.
• Accessories
Cable bushing ............................................ 1
Hexagon socket screw ............................... 4
Waterproof cap ........................................... 4