Toa C-BC704W - Manual (Page 9)

9
Remove
Rubber gasket
Rear plate
Attach
Rubber gasket
4.2. Open Wiring
1. Run the composite cable supplied with the C-CC704 through the cable bushing supplied with the unit.
Remove the connectors on the end of the composite cable before running the cable through the cable
bushing.
2. Remove the rubber gasket attached to the Wall Mounting Bracket, then attach it to the cable entry hole in
the rear plate.
3. Run the composite cable with a cable bushing mounted from the cable entry hole of the Wall Mounting
Bracket.
Remove
Insert