Toa C-BC704W - Manual (Page 4)

4
2. GENERAL DESCRIPTION
The C-BC704W Wall Mounting Bracket is designed to mount the C-CC704 Combination Camera to a wall.
It also permits the camera to be mounted on a pole in conjunction with the optional C-BC771PM Camera
Pole Mounting Bracket and YS-60B Mounting Band.
3. HANDLING PRECAUTIONS
• Mount the unit to a concrete wall or robustly constructed wall surface. When mounting the unit to a pole, pay
special attention to the sway and strength of the pole, and mount it securely at an appropriate height that will
not cause the pole to sway and possibly weaken it. Moreover, avoid mounting the unit to a pole on which
other objects susceptible to wind are also mounted.
• Bolts and nuts used to fix the unit to a wall are not included. Prepare those appropriate for the materials and
the strength of installation location, and strong enough to withstand the total weight of the unit and the
camera.
• Do not install the unit in locations exposed to constant vibration. Do not install the unit in a vehicle nor ship.
• Avoid installing the unit on sea or shore, or in locations exposed to corrosive gas, herbicides or other
sprayed liquid chemicals, or extraordinary combustible conditions.
• Be sure to use the safety wire when mounting the unit.
• Combination cameras is designed solely for suspended installations. The dome must be suspended
vertically with its dome facing downward. Use special care not to suspend it at a tilted angle.
• Do not give the unit a great shock or vibration, as this will cause the unit to fail or break.