Toa C-PH200 - Manual (Page 12)

Application
24 VAC (Common)
24 VAC
Camera power supply
Defroster
Wiper
Unused
Lens (Common)
Iris
Focus
Zoom
Unused
Video (coaxial cable shields)
Video (coaxial cable core)
12
1
2
Ceiling
Pan/tilt head
Housing cable
Camera housing
When suspending the housing, reverse
the housing mounting directions referred
to in the instructions for upright mounting.
Note
Do not use the bolts attached to the camera housing when suspending.
Removing the bolts allows dust to enter, causing equipment failures.
5.7. Camera Housing Mounting (Suspended Installation)
TOA’s C-CH Series Camera Housings can be installed in a suspended position.
Note: Since a waterproof function is disabled, avoid suspending such housings outdoors.
1. Using the housing suspension slots, attach the camera housing to the C-PH200 Pan/Tilt Head.
Note: Housings do not come with their mounting bolts. Prepare the following nuts and bolts:
• M6x12 hexagonal head bolt with washer : 2 pieces
2. Route the housing cable.
5.8. Housing Cable Specifications
Lead No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Color
Green
Yellow
Blue
Gray
Red
Black
Purple
Orange
White
Peach
Brown
Coaxial cable shields
Coaxial cable core