Triner Scale TSM Series - Manual (Page 14)

Set Up Guide | Floor Scale
12
Condition Possible Problem & Correction
Scale consistently
displays weights that are
too high or too low.
• Indicator not properly adjusted
to zero: Zero the indicator
according to the indicator
manual.
• Platform binding: Provide
adequate clearance for free
platform movement. Make sure
a ramp(s) is not touching the
scale. Remove any debris
under and around the scale
platform.
• Indicator not calibrated
properly: Calibrate the system
according to the indicator
manual.
• Load cell(s) faulty: Test and
replace load cells if necessary.