Triner Scale TSM Series - Manual (Page 4)

Set Up Guide | Floor Scale
2
Introduction
THE TSM SERIES WEIGHING PLATFORM
The TSM Series Floor Scale weighing platform is a
fully electronic, low profile platform, engineered to
provide years of reliable service. It is available in
wide range of sizes from 24” x 24” to 96” x 120”, and
capacities from 1,000 lbs to 20,000 lbs.
All platforms are equipped with four, corner mounted
NTEP approved loadcells that are recessed into the
scale frame for protection. Also included is a signal-
trim summing board enclosed in a watertight
junction box. The junction box is accessible from the
top of the scale for ease of service.
The platform utilizes precision “ball and cup” style
adjustable leveling feet designed to compensate for
irregularities in the floor.
OPTIONS
• Foot Retaining Plates
• Access Ramps
• Side Protection Guards
• Indicator Mounting Stand
• Pit Frame for In-ground Installations
UNPACKING THE PLATFORM
All Triner Low Profile Floor Scale weighing
platforms are shipped LTL on a pallet. Remove
the packing material and inspect the scale for
any damage that may have been caused during
shipment.
THE DIGITAL INDICATOR, LEVELING FEET AND
ANY SMALL ACCESSORIES ORDERED ARE
SHIPPED SEPARATELY VIA UPS GROUND.